JONIEC Water-repellent impregnate

Joniec hydrophobic impregnant used for surface protection of concrete fence blocks and prefabricated blocks.

UNIVERSAL HYDROPHOBIC IMPREGNATE - creates a protective membrane against water penetration into the substrate, extends the life of the facade and increases frost resistance parameters.

The hydrophobic layer formed significantly reduces the surface of water absorption, binds dust and prevents contamination of the substrate. The surface retains breathability and does not change its original color. The impregnate can be used indoors.

Capacity: 5l

Effect of the impregnator:
creates a protective membrane protecting the surface of the fence against water penetration
created hydrophobic layer significantly reduces the surface of water absorption
binds dust and prevents contamination of the surface,
the surface does not change its original color
prolongs the life of the fence
the surface retains its breathability
increases frost resistance parameters

Directions for use:

Impregnation is recommended not earlier than one month after the completion of construction, on a cleaned and dry fence surface. (Average yield from 5l - about 25m^2).

Before use, read the information and recommendations on the product label

Remove dirt with a suitable cleaning agent, e.g. JONIEC® spot and stain remover. The surface to be impregnated should be dry and clean.

When impregnating, pay special attention to protect surfaces not intended for impregnation and surfaces sensitive to solvents.

Stir the product thoroughly before use. The product should be applied evenly on the surface with a brush, roller or spray and left for several minutes, so that the necessary amount of preparation is absorbed into the material. If it is necessary to apply another layer, use the "wet on wet" method.